Invoicing in construction: 6 % renovation VAT and co-contracting

Construction workers on a building site seen from aboveUnsplash

If you work in construction or renovation in Belgium, the VAT line on your invoice is rarely just "21 percent". Depending on who your client is and what kind of building you work on, you may charge 6 percent, 21 percent, or no VAT at all because the client pays it himself. Each case needs its own wording on the invoice, and a missing sentence can cost you the reduced rate or turn a correct invoice into an irregular one.

This article walks through the three situations you meet most often on a building site: renovation of an older private home, work for a VAT-registered business client, and everything else.

Construction workers on a building site seen from aboveUnsplash

Three questions before you write the VAT line

Before choosing a rate, answer three questions in this order:

  1. Is it immovable work? Building, renovating, repairing, installing fixed equipment, maintenance of a building: these are "travaux immobiliers / werken in onroerende staat" in the VAT Code.
  2. Is the client a VAT-registered business that files periodic VAT returns? If yes, the co-contractor scheme (reverse charge) usually applies and you do not charge VAT.
  3. If the client is a private person, is the home old enough and used mainly as a private dwelling? If yes, the 6 percent renovation rate may apply. If not, it is 21 percent.
ClientBuildingVAT on your invoiceMention needed
VAT-registered business filing periodic returnsAnyNone, client self-assessesFull "Autoliquidation" wording
Private personHome first occupied 10+ calendar years before the first invoice, mainly private use6 %Standard 6 % wording
Private personNewer home, or not mainly a dwelling21 %None specific

The 6 percent renovation rate for older homes

The reduced rate of 6 percent is the main reason construction invoices look different. It applies to renovation, transformation, repair and maintenance work when all of these conditions are met:

  • the building was first occupied in a calendar year at least ten years before the date of the first invoice for the work (a deposit invoice counts as the first invoice),
  • after the work, the building is used exclusively or mainly as a private dwelling,
  • the work is supplied and invoiced directly to the final consumer: the owner, the tenant or the holder of a usufruct.

If you invoice a property developer, another contractor or a company, the 6 percent rate does not apply, even if the house itself is old. Materials that the client buys separately in a shop are also outside your invoice, so they stay at the rate charged by that shop.

VAT on 10,000 EUR of renovation work: At 6 % (home over 10 years): 600 EUR, At 21 % (standard rate): 2100 EUR

On a 10,000 EUR job the difference for your client is 1,500 EUR. That is why clients ask for it, and why the tax authorities check that the conditions are really met.

The mandatory 6 percent wording since July 2022

Since 1 July 2022, the old signed certificate from the client has been replaced by a standard mention on the invoice itself. The text says, in short, that unless the client contests it in writing within one month of receiving the invoice, he is presumed to confirm that:

  • the building was first occupied at least ten calendar years before the first invoice,
  • after the work it is used exclusively or mainly as a private dwelling,
  • the work is supplied and invoiced to a final consumer.

It also reminds the client that he becomes liable for the tax difference if these statements turn out to be wrong. The wording is fixed by regulation, so copy it exactly in the language of the invoice rather than writing your own summary. [TO VERIFY: copy the exact current wording from the SPF Finances page on the 6 % renovation rate before using it on invoices.]

No mention, no 6 percentIf the standard sentence is missing, the reduced rate is not justified on the invoice. In a VAT audit, the difference up to 21 percent can be claimed, usually from the contractor.

Co-contracting: invoicing without VAT to a business client

When you carry out immovable work for a client who is a VAT-registered business filing periodic VAT returns, the co-contractor scheme applies. It comes from article 20 of Royal Decree no. 1 of 29 December 1992. You do not charge VAT. Your client declares and deducts it himself in his own VAT return. This avoids a business having to pre-finance VAT on building work.

Typical cases: a plumber working for a general contractor, an electrician fitting out an office for an SRL, a painter working for a VAT-registered self-employed client on his business premises.

Since 1 January 2023, the single word "Autoliquidation" is no longer enough. The invoice must carry a longer standard text, set by the Royal Decree of 26 October 2022, saying that unless the client contests in writing within one month, he is presumed to confirm that he is a taxable person required to file periodic returns, and that he is liable for any VAT, interest and fines if that is not true. [TO VERIFY: copy the exact wording of the "Autoliquidation" mention from SPF Finances.]

Check the client before the first invoiceLook up the client's VAT number in the BCE/KBO and in the European VIES service before invoicing. A business that is VAT-exempt or does not file periodic returns does not qualify, and you must then charge VAT yourself.

Deposits, staged invoices and credit notes

Construction work is often invoiced in stages. A few rules keep this clean:

  • Deposit invoices follow the same regime as the final work. A deposit for renovation at 6 percent needs the 6 percent wording, and a deposit under co-contracting needs the full "Autoliquidation" wording.
  • The date of the first invoice (often the deposit) is what counts for the ten-year age test of the building.
  • If you used the wrong regime, do not simply edit the PDF. Issue a credit note that cancels the wrong invoice, then a new invoice with the correct rate and the correct wording.
  • Describe the work and the address of the site on every invoice. It makes the rate easy to justify and helps the client file the right documents.
Carpenter in safety gear working on timber in a workshopUnsplash

Peppol also applies on the building site

Since 1 January 2026, invoices between Belgian VAT-registered businesses must be sent as structured electronic invoices through the Peppol network. For a contractor, that covers almost every co-contracting invoice, since the client is by definition a VAT-registered business. A PDF by e-mail is no longer enough for those invoices.

Invoices to private homeowners at 6 or 21 percent are not covered by the Peppol obligation. You can keep sending them by e-mail or on paper.

1,500 EURfine for a first Peppol breach
3,000 EURfor a second breach
5,000 EURfrom the third breach

The fines target businesses that cannot send or receive Peppol invoices. A tolerance period ran during the first three months of 2026 and is now over.

Keep the wording in your templates, not in your head

Most mistakes on construction invoices come from a template that was set up once and never adapted: a 21 percent default line on a renovation job, or a co-contracting invoice without the 2023 wording. A practical approach is to keep three invoice models (6 percent renovation, 21 percent standard, co-contracting) and choose the right one per client and per site at the quote stage.

Shark-it, the invoicing app by TRUE DATA, finds a business client from its VAT number, sends and receives invoices through Peppol in every pack, and works on the web, iPhone and Android, so you can invoice from the site. You can try it at shark-it.be.